Hold down the LAN Reset button for approximately 4 seconds. To activate the LAN Reset function, ensure the power supply is on and in standby mode. The LAN Reset button provides a way to reset the LAN configuration password and to set the device back to DHCP/Auto-IP mode.
Default LXI TCP/IP Ethernet Setting (without DHCP server) ¶ IP Address This routine is used by most computer operating systems. The device then automatically selects an IP address from 169.254.#.# and subnet as described in RFC 3927 (Request for Comments 3927 - Dynamic Configuration of IPv4 Link-Local Addresses). If the Ethernet board does not discover a DHCP server, the MagnaLOAD electronic load will default to the Auto-IP configuration as defined in Table 8.2.
By default, DHCP is enabled on the MagnaLOAD electronic load.
